The EMC Lab boasts a wide selection of instrumentation and software tools for basic and applied EMC research, including:

Semi-anechoic chamber

• Size 7.5 m x 4 m x 3.3 m, for measurements up to 3 m in the frequency range 26 MHz – 40 GHz.
• Anechoic covering by ferrites and absorbers. Full-compliance performances for radiated immunity and pre-compliance performances for radiated emissions.
• Turntable diameter 1.5 m, max weigh 500 kg, with optic link for remote control.
• Antenna mast with manual height positioning and pneumatic polarization.
• Filtered supply three-phase and single-phase ac 32 A.
• Optic Ethernet datalink

Measurement automation

• Software ETS-Lindgren TILE!
• Controller ETS-Lindgren EM Center.
• Controller EMCO CO3000 (turntable).

Measurement chain for radiated emissions

• EMI Receiver Keysight MXE N9038B, 3 Hz – 26.5 GHz.
• Loop Antenna EMCO 6509, 1 kHz – 30 MHz.
• Biconical Antenna ETS-Lindgren 3110C, 30 MHz – 300 MHz.
• Log-Periodic Antenna ETS-Lindgren 3148B, 200 MHz – 2 GHz.
• Horn Antenna ETS-Lindgren 3117, 1GHz -18 GHz.

Measurement chain for radiated immunity

• Instrumentation update in progress

Network and Spectrum Analyzers

• Vector Network Analyzer Keysight ENA E5080B, 9 kHz - 6.5 GHz, four ports, with electronic calibration device.
• Vector Network Analyzer Keysight ENA E5061B, 5 Hz – 1.5 GHz, two ports, additional gain-phase ports and setup for impedance analysis.
• Handheld Spectrum Analyzer Keysight FieldFox N9913A, 30 kHz - 4 GHz.

Arbitrary Waveform Generator

• Keysight M8190A, 5 GHz, 12 Gsa/s.

Oscilloscopes

• Keysight MXR604A, 6 GHz, 16 Gsa/s
• Keysight DSOX1204G, 200 MHz, 2 Gsa/s

Measurement chain for conducted emissions

• Ad hoc ac supply with three-phase insulation transformer 32 A
• LISN Schwarzbeck nslk8128, three-phase and single-phase 32 A, 9 kHz – 30 MHz
• LISN Messtec AN4032, , three-phase and single-phase 32 A, 9 kHz – 30 MHz
• Pair of LISNs Teseq HV-AN 150 for automotive (CISPR25), military (MIL-STD 461) and airborne (DO-160) equipment.

Injection and monitoring of conducted disturbances

• Electromagnetic Clamp Shaffner KEMZ801, 150 kHz – 230 MHz
• Coupling/Decoupling Network Shaffner M325, three-phase 32 A, 150 kHz- 230 MHz
• Bulk Current Injection probe FCC F-120-2, 10 kHz – 230 MHz
• Tubular Wave Coupler AR BI30413, 400 MHz-3 GHz with calibration fixture
• Monitor Probe Solar 9205-1, 20 Hz – 8 MHz
• Monitor Probe Solar 9123-1N, 10 kHz – 500 MHz
• Calibration Fixture FCC-BCICF-1,10 kHz – 400 MHz

Burst, Surge, Electrostatic Discharges

• Integrated Generator EMTest UCS 500-M with single-phase 16 A CDN
• Capacitive Clamp
• ESD Gun

Static and low-frequency field sensors

• 3-Axis dc Hall magnetometer Metrolab Instruments THM 7025
• Field Analyzer Narda EFA 300, 5 Hz - 32 kHz

Software for electromagnetic simulation

• Ansys (HFSS, Maxwell, etc.) active academic licence on regular basis
• CST Microwave Studio (licence can be activated for specific projects)
• EMSS Feko (licenze can be activated for specific projects)